Phrozen SC-801 Clear Resin is possibly the clearest 3D Printer Resin on the market. If you need clear. REALLY CLEAR. Then look no further!
Specification & Performance
- Volume: 1kg
- XY Resolution: 0.075 mm
- Layer Height / Parameter: 20 sec @ 50microns
- Key Performance: Highly transparent resin. Does not yellow. Low powered UV curing light recommended for post-cure.
- Cleaning Part: Use alcohol spray (or Phrozen Wash) to clean models and dry by air gun or compressed air. Do not immerse printed part into alcohol for more than 30 sec.
- Application: Optical part, transparent models
Key Performance:
- Viscosity: 142 cps
- Proportion: 1.1
- Tg: 73 °C
- Elongation: 17 %
- Break value: 12 MPa
- Surface hardness: Shore 70D
- I-Zod Impact: 2.68 KJ/m2
Operation:
- Avoid exposure to sunlight and indoor luminescence
- Return resin from VAT to bottle. Be sure to filter
- Please preserve resin in closed opaque bottle to avoid both air and light exposure
- Do not mix resins together
- Please keep the resin away from children
- Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics
Safety:
- Do not eat or swallow resin. If ingested seek medical advice immediately
- Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
- Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If allergic reaction occurs stop using immediately
- Resin has mild odour. We strongly recommend you to use in a well ventilated room or area
- Recommended safety equipment: gloves, mask, goggles
- Store resin in a cool dry place. 15-35 degrees recommended
Reviews
There are no reviews yet.