Phrozen Resin TR250 High Temp Deep Grey 500g

Created to take the heat, Phrozen TR250 High-Temp resin has been tested up to 150 degrees. It is suitable for a variety of applications including but not limited to moulds

• Contents: 500G
• XY Planar Resolution: 50 micron
• Z Resolution (Layer Height): 20-100um
• Cleaning: Clean with alcohol spray (or Phrozen wash). Dry with air gun or compressed air. Do not immerse model in cleaning solution for long periods
• Suitable for: LCD 3D Printer
• Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
• Colour: Deep-Grey
• Low viscosity

Performance

• Viscosity:706 mPa.S (25C)
• Density: 1.10 g / cm3
• Tensile Stress (Break): 68 MPa
• Elongation: 1 %
• Tensile Modulus: 1050 MPa
• Hardness: Shore 85 D
• I-Zod Impact:3.05 KJ/m2

Operation:

• Avoid exposure to sunlight and indoor luminescence
• Return resin from VAT to bottle. Be sure to filter
• Please preserve resin in closed opaque bottle to avoid both air and light exposure
• Do not mix resins together
• Please keep the resin away from children
• Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics

Safety:

• Do not eat or swallow resin. If ingested seek medical advice immediately
• Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
• Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If allergic reaction occurs stop using immediately
• Resin has mild odour. We strongly recommend you to use in a well ventilated room or area
• Recommended safety equipment: gloves, mask, goggles
• Store resin in a cool dry place. 15-35 degrees recommended